Hardware

A few days back i started a new series on YouTube, named “Retro Corner”. The plan is to get some old hardware up and running (Starting with the IBM ThinkPad R51e in video 1) and then continue on with some other machines (I have a couple of old Mac Laptops coming in the next video) and Networking (Dial Up, ISDN and, well. more on that soon.).

So, If you are interested, please Subscribe and check out the videos. And any videos you want to see on the channel, please leave a comment.

Well, it’s Prime Day 2023, so I have been busy ordering some stuff, and, well, given everyone and their mother is doing posts on Prime Day stuff, I thought I would add my list of interesting things, including some of the things I bought. PS: all links are affiliate links and were found in the UK Store, but links are using GeniusLink to redirect you to the best store for you… Some items in the UK store might not be found in the US or other stores…

It’s been a while… So, for Day 61 of #100daysofhomelab, I thought I should write up how to swap a disk in a Hetzner Dedicated Machine. I have a dedicated server I rent from Hetzner in Germany. It has an Xeon E5-1650 V2 processor (6 cores, 12 threads, 3.5Gz base, 3.9Gz turbo), 128Gb RAM, and a pretty impressive 15 6Tb HDD. All drives are hooked to a Mega RAID controller, but because I am running ProxMox, I left it in JBOD mode and set up the 15 drives in RAIDZ-2. All 15 drives are in a single pool (probably not ideal, but it works for me). Now and again, I get a message from ProxMox telling me about bad blocks… and every time it happens, I have to remember what to do to find the bad drive, report it to Hetzner, wait for them to replace the drive and then add it back to the pool… Today, it happened, so I thought I better document it, to help future me, and hopefully someone else out there… First, we need to find the drive in question. Usually, I’m my alerts, I get the Serial number of the drive causing problems. So, I ran the following command:

Day 57 of #100daysofhomelab and its a link dump for today:

Day 56 of #100daysofhomelab and I managed to fix some stuff with my TrueNAS box. There was lots of messing when it came to permissions, but it works now. Some speeds are below. Not quite getting the speeds I was expecting, but there I have not tweaked anything, yet… This is going from my MacBook Pro with a 10Gb adapter. The reads are quite good, but the writes… well, the HDDs are FASTER than the NVMe… No idea why… I did get a new card to add another 4 NVMe drives in… We’ll see what happens when that gets built.

Day 53 of #100daysofhomelab and It’s been a busy week… ish… I’ve been battling with Vertigo on and off this week, so haven’t don’t a lot. I did, however, fix some issues with the network, set up a proper failover WAN connection using SmoothWAN and my Quad 2.5Gb Box, and have started making major changes to GodBoxV3.

Day 14 of #100daysofhomelab and I have been thinking about future upgrades if I had the money… So, I have my CloudShed in the back garden. Currently, I only have an HP Micro Server and a (not currently in production) Dell R720, along with a Ubiquiti Edge Switch 48 Lite. Between the Shed and the house is a fibre link purchased through FS.com, with 6 pairs. Currently, only 1 pair is in use, giving me a 10Gb/s between the house and shed, and with the easy option to upgrade to 20Gb. But I have been thinking bigger.

Day 4 of #100daysofhomelab and I am still reading the docs I posted yesterday on Kubernetes. I hope to get something sorted this weekend… On a different note, I posted a new YouTube video on the iODD ST400, linked below. This is a follow-up to my iODD Mini review I did a couple of years back. Hopefully, I will have a second video with some speed tests and a better walk in the next few days… hopefully.

A few weeks back, Ubiquiti released a pre-release update for the Unifi Network Controller, version 7.1.61. It got installed on my UDM and I noticed a few interesting bits that you might find handy… First, you will need to be signed up for Unifi Early Access before you can download or even read the release notes, but this is just a quick update based on my findings so far.

For the last few weeks, I have been running a Raspberry Pi in my car, along with a small UPS and a Wifi Access point, allowing me to download videos from my dash cam and back them up to my NAS in the house. But I have had some teething issues, and I am currently thinking my way through some fixes…

While trying to figure out how to fix part 1, I came up with an idea: I have an older Mikrotik RB951G that can be powered via a 12v adapter for the car. I am going to use that, along with a Huawei 4G dongle to act as an internet connection. The onboard Wifi will be in client mode, so when it’s near the house, it will connect to the main network and send traffic through that to the internet (or internal NAS) and when away, use the LTE modem. Then, using the Wifi dongle on the Raspberry Pi, use that as a Wifi AP.