Tutorial

So, a few weeks back, i got my hands on a Hetzner Dedicated box. It has a quad core Xeon, 32Gb ram, 3x3Tb hdds, RAID controller and KVMoIP. one of the first thing i did was get myself a /29 IP pool (8 total, 6 usable IPs). There where already 3 IPs given to me: 1 for the KVM, one for the box itself, and 1 as the router for the IP block.

Quick tip for all you with internet facing VMWare ESXi Hosts. I
have just got my hands on a box on the Hetzner network (more on
that later) and using their LARA system i installed ESXi on it. All was good, then I tried login in a couple hours later and i kept getting errors about my password being wrong… So, i tried a few more times, got pissed off and rebooted the box (had to do a hard reboot, since i couldn’t even get in over KVM). I though this was a hardware issue, or a config issue, and left it… yesterday, i had the console open most of the day, and when looking at something i noticed this:

Now that all my sites are running Jekyll I am trying to get them optimized for SPEED which meant
looking at all the stuff that takes time to download… There are more tweaks (and possibly posts) coming down
the road, but to start, I needed to look at images.

First things first. I’m running this on a Sabayon Linux box, so some of the install commands will be different… (Also, i do need to explain why I moved from Windows to Linux on the GodboxV2, but that’s a different post…)

I mentioned HubiC in my last post, and in it i said that you could use Duplicity for backups. Well, this is how you get it to work…

First, i am using Ubuntu 14.04 (i think…). I use Ubuntu in house for a few things:

• its running Tiernan’s Comms Closet, GeekPhotographer and Tiernan’s Podcast all in house, aswell as being used to build this site. The Web Server and MySQL Server are seperated, MySQL running on Windows, web on Ubuntu… but thats a different story…
• I have a couple of proxy servers running Ubuntu also
• Other general servers running Ubuntu… dont ask, cause i cant remember what they do half the time…

So, Duplicity is a backup application. From their website:

HubiC is an online storage site, built by the guys at OVH. They are currently offering 30Gb free (if you use the link above) or if you pay, you get 110Gb (insted of the usual 100Gb) for EUR1 a month, or 10.5TB (yup… TERABYTES!) for EUR5 a month… Thats a crazy amount of storage for a not crazy amount of money!

So, while playing around with different things, I found they have an API, so other than the usual apps to play with (like the Hubic Apps for iPhone, Android, Windows Phone, Windows Desktop and OSX, Duplicity for backing up *nix boxes, and a few others) you can build your own…

I have been wanting to setup an IPv6 network for a while now, but never had the hardware or network to support it. My broadband Modem, a Cisco EPC3925, was pretty useless… But with the advent of Bridging on the Cisco EPC3925 it now works!

The first thing i needed to do was setup a Tunnel Broker Account with Hurricane Electric. I got a /64 block of IPv6 addresses, which should do me for a while… 🙂

I have a Late 2008 MacBook Pro in the house, and SSH is enabled on it. I usually leave it on when in work. Anyway, SSH is enabled, but VNC access is not… I found the following command on Ryan’s Tech Notes allowing you to enable it though SSH:

** NOTE ** Change mypasswd to your own password!!!

If you need to disable it, use the following:

Also, of note, I am using RealVNC client for Windows to connect.

In house, I have been using Microsoft TMG 2010 Server for a while now. I use it as a firewall for some of the machines on the network, and also as a proxy for most, if not all, machines. When acting as a Firewall, all traffic flows though the machine, be it HTTP/HTTPS, SMTP/POP3/IMAP, or anything for that matter. You can also lock down ports on the box, which is a feature of most firewalls, but i like TMG due to its relitive ease of use…

As a follow-up to yesterday’s post on RouterOS Blocking Machine access to all but one IP, I thought I would show how to add extra IPs to that list, without having a shedload of firewall filters.

• First things first, get your list of IPs you allow access to. In my case, I just did an NSLOOKUP on the name and got the IPs.
• Create an “Address List” in RouterOS. This can be done on the Web Interface by going to IP / Firewall / Address List and clicking Add. I had none previously, so I created a new rule, naming it ExpressVPN (the lads I use for VPN access) and added the first address.
• this is where things get interesting. for extra IP (for ExpressVPN, I have 4) you create a new address with the SAME name, but different IP.
• in your firewall rule, you should have either an src address or a dst address. in my case, I had both, but this was a change for the dst address. I removed the address from the rule, and I added it as a dst address list entry. If you have multiple address lists, you will see them here.

to do this at the command prompt:

So, I have a machine on my network, which should be only connecting to the internet through a VPN. I needed to tell my RouterOS box to block all access, except to this said IP address. The following should do the trick. YMMV

this will drop any packets from the srcaddress (IP address) that are not for the destination dstaddress (IP address). in my case, dstaddress is the VPN server I want to connect to. So, in theory, all packets should just go through the VPN and not leak out into the rest of the network. again, still testing this so be careful!